top of page
A wall which has custom oak wood panelling installed from top to bottom

Bespoke Carpentry & Joinery in Kingston 

Carefully planned, precisely fitted carpentry and joinery for homes across Kingston upon Thames. 

A Carpenter Who Knows the Area 

I'm based just up the road in Chessington, so this is somewhere I work regularly, not somewhere I'm passing through for the odd job. 

That local knowledge makes a difference. The area has such a mix of properties, from Victorian terraces close to the town centre to newer apartments along the river, and each one comes with its own quirks. 

Having worked on a range of homes across Kingston, I understand many of the common challenges before the work even begins. 

Why Homeowners Choose TOB Carpentry 

Properly Planned

Every project starts with a proper look at your home, and how you actually use it. 

Made to Measure 

Built around the exact dimensions of your space, not adapted from something standard. 

Finished Properly

Tidy, careful work, left clean at the end of every single day. 

Qualified & Experienced with an Eye for Detail  

With NVQ Levels 2 & 3 in Carpentry & Joinery, more than 14 years of hands-on experience across high-end residential properties, commercial fit-outs, TV studios and film sets, and a second-place finish at the SkillBuild National Carpentry Finals, the standard of the work is something I take seriously. 

 

That depth of experience means I know how to plan properly, anticipate problems before they become expensive ones, and deliver a finish that feels right in your home. Full details are on the About page.

Tom O'Byrne (TOB Carpentry) standing in front of his branded blue van, smiling and folding his arms wearing a branded top.

Bespoke Carpentry & Joinery Services I Offer in Kingston

From finishing touches to complete installations, I can help with everything from a single room to a full home renovation.

Doors & Openings 

Doors supplied and fitted properly, with new frames, linings and ironmongery handled as part of the same job. 

Made to measure bifold doors and room dividers, designed around the space so the finished result looks like it was always meant to be there. 

A bespoke white wood and glass internal door installed by TOB Carpentry
A wall with oak panel strips, installed by TOB Carpentry

Finishing Details 

The finishing details that tie a room together. Fitted cleanly to the wall and mitred neatly at every corner. 

One of my favourite transformations. Bespoke wall panelling, designed around the room and fitted with tight joints throughout. 

Storage & Fitted Furniture 

Fitted wardrobes that make use of awkward alcoves and sloped ceilings, built to fit properly rather than adapted from something standard. 

Built specifically for the space, turning an awkward recess into something genuinely useful. 

A bespoke grey alcove unit beautifully fitted into an alcove
Close up of the join and hinge of a bifold door, custom made by TOB Carpentry

Second Fix Carpentry Kingston

From a single room to a full renovation, all aspects of second fix carpentry are handled carefully and finished to a standard you’ll notice for the right reasons. 

Whatever your carpentry requirements, get in touch today to discuss your project.

Fitted Wardrobes Built Around Your Kingston Home

A lot of the fitted wardrobes Kingston homeowners come to me for are about solving a specific problem rather than just adding storage. 

Victorian terraces near the town centre often have deep alcoves either side of a chimney breast that standard wardrobes were never going to fit properly. Loft conversions and homes with sloped ceilings need something designed around the shape of the room rather than squeezed into it. 

Whatever the layout, the wardrobe is built to those exact measurements, so it ends up feeling like part of the room rather than something added afterwards. 

Made to measure floor to ceiling whitewardrobes with long silver handles
bespoke oak framed bifold door, installed to divide a room

A Few Things I’ve Noticed Around Kingston

Properties around Kingston Hill and Coombe tend to be older and a bit grander, with higher ceilings and decorative mouldings that need matching carefully if you’re extending or repairing existing skirting and architraves. 

Closer to the river and the town centre, space is often the bigger challenge. Apartments and converted properties don’t always have room for freestanding furniture, which is usually where bespoke alcove units or fitted wardrobes make more sense. 

I’ve also worked on jobs right in the town centre, including doors fitted at a studio nearby, so I’m used to working around parking restrictions, access and the practicalities of a busy high street.

Close up of hands cutting wood

Client Feedback

"Tom designed, procured and fitted a room divider and double door for me. His approach was faultless, the quotation was a fully detailed statement of work, a schedule was agreed and the installation was perfect, with the property left fully cleaned and tidy. I couldn’t be happier with the job and Tom demonstrated the highest standards of professionalism and craftsmanship. I strongly recommend Tom for your future joinery and carpentry projects. "

- Alex, Kingston-Upon-Thames

Areas I Cover 

As a carpenter based in nearby Chessington, I cover Kingston Upon Thames and the surrounding area regularly, including: 

  • New Malden

  • Surbiton

  • Norbiton

  • Kingston Hill

  • Tolworth 

  • Berrylands

  • Hampton Wick 

  • Canbury

Not sure if I cover your street? Just get in touchand I'll let you know. 

FAQs

  • 01
  • 02
  • 03
  • 04
  • 05

If you have any questions, please don’t hesitate to contact me.

Ready to Discuss Your Project? 

Not sure exactly what you need? No problem. Whether you've got a clear plan or just want some honest advice, I'm always happy to help.

 

Get in touch today for a free, no-obligation quote for bespoke carpentry and joinery in Kingston upon Thames.

bottom of page